The Tread Skiver Knives shown here are made from AISI A-2 tool steel.
The fact that A-2 contains 5% chromium does not make it a true stainless steel,
but it resists rust. At 52 RC hardness, these are the best knives on the market.
In addition, these knives are available in other air-hardening grades of tool
steel upon request.
| OPTIONAL EDGE TREATMENTS: |
| |
8 radial slots-1/8"w x 1 1/2"d
drilled and slotted as pictured
Tungsten Carbide Plating
Teflon Coating
|
|
|
|
Alcon tread skivers are dished 1/64" so that the flat side does not become
convex at high speeds, and static lateral runout (wobble) is less than .005".
|
|
